Home>Technology

Common Problem Technology

Technology

: PE protective film quality inspection content and method

The use of PE protective film itself is to protect the surface of the material, but if the quality or performance of the selected protective film is not up to standard, it will inevitably affect the play of its protective role. In this case, the protective film must be tested.

Release Time：2024-02-20

20 2024-02: PE/PET/PVC protective film is widely used

Using polyethylene plastic film as the base material, crosslinked polyacrylic resin as the adhesive, and adding several special auxiliaries, the preparation and debugging were prepared. The glue is colorless and transparent, soft, good adhesion, and has a broad range of protection for various plates and can be used in the protection of different material surfaces.

20 2024-02: The characteristics and uses of PE mesh film

PE mesh film: is one of the PE protective film, belongs to the low viscosity protective film, its surface has a lot of mesh, called mesh protective film.

20 2024-02: The characteristics of the screen protective film

Mesh PE protective film because of the reason of mesh, it is better than transparent on bright products, so it is often used in some highlight products. With the increase of market demand, the demand for mesh PE protective film is increasing.

20 2024-02: Characteristics of PE electrostatic film

Electrostatic protective film composite synchronous equipment will be a variety of materials surface protective film extrusion. The method of making protective film is also known as PE anti-static polyethylene film, PE self-mucous membrane, electrostatic protective film and so on. In the past, the packaging of some products is prone to problems in transportation, the most common is the problem of wear, which will cause great economic losses.

20 2024-02: How to extend the service life of reverse osmosis membrane? The protection method is important

Reverse osmosis membrane is an important part of water treatment equipment, widely used in electronics, electric power, automotive, food, medical and other fields. All mechanical equipment has a service life, the service life of water treatment equipment in addition to design, material and other factors, but also has a great relationship with the life of reverse osmosis membrane.

20 2024-02: Can mobile phone film hurt your eyes? Select mobile phone film tips

Can mobile phone film hurt your eyes? I believe this is a problem that many friends who want to put a film on their mobile phones are troubled by. Mobile phone film can protect the screen, but relatively speaking, it will lead to increased visual fatigue, dizziness, vision loss, astigmatism and so on.

20 2024-02: The basic knowledge of anti-static stretch film

LLDPE new material is processed by three-layer casting extruder to make PE film with anti-static effect, which is used for drawing and winding of the card plate, plus high quality tackifier, which is heated, extruded, cast and cooled by chill roll. It has the advantages of strong toughness, high elasticity, tear resistance, high viscosity, thin thickness, cold resistance, heat resistance, pressure resistance, dust resistance, water resistance, single side adhesion and double side adhesion

20 2024-02: Furniture film, solar backplane film, fiberglass tile film,PET heat shrinkable film applications

Polyester film (BOPET) is a kind of polymer film material with excellent comprehensive properties. It is made from polyester chip by drying, melting, extrusion, casting, bidirectional stretching, heat setting, winding and cutting. Polyester film (BOPET) has the characteristics of high mechanical strength, good rigidity, strong toughness, excellent electrical insulation performance, high transparency, high gloss, non-toxic, odorless, tasteless, wear resistance, folding resistance, pinhole resistance and tear resistance.

20 2024-02: Description and use of acrylic PET protective film

Acrylic PET protective film is made of PET (polyester film) as the substrate, coated with acrylic glue on one side and fitted with release film (or not).

20 2024-02: Choose PE protective film 5 tips

As we all know, pe protective film brings great convenience to our life, mainly in the process of production and processing, transportation, storage and use, to ensure that the product is not polluted, corrosion, scratch, scratch and other surface protection, can effectively protect the original smooth and glossy surface of the product, so as to improve product quality and market competitiveness.

20 2024-02: PE protective film adhesion factors

In the protective film industry, the viscosity of the protective film is determined by the ratio of raw material glue and the amount of glue. In order to make PE protective film sticky, we generally use pressure sensitive adhesive; In the process of applying pressure sensitive adhesive, adhesion will appear in addition to the viscosity of the protective film itself, but also has a direct relationship with temperature, coating and storage.

20 2024-02: PE protective film is mainly divided into six categories according to the adhesive force

PE protective film is mainly divided into: ultra-low adhesive protective film, low adhesive protective film, medium and low adhesive protective film, medium adhesive protective film, high adhesive protective film, ultra-high adhesive protective film

Scan QR code

Mobile Website

Contact

China-East China Region

Suzhou Xiaomifeng Electronic Technology Co., Ltd.

Address:No. 18, Xinyuan Road, Taicang City, Jiangsu Province (Haimei International Phase 2)

Tel:0512-55387346

Fax:0512-55387349

Customer Service Director:Xu Xiyu15335277806